SC/APC Fast Connector
1 Product Structure1 1 Measuredthe Structure1 2 Product length 50mm ≤L≤60mm2 Optical Characteristics CategorySpecific
- Product introduction
1.Product Structure
1.1 Measured the Structure
1.2 Product length
50mm ≤L≤60mm
2.Optical Characteristics
Category | Specification | ||
Aoolicable for | Drop cable.Indoor cable | ||
Fiber mode | Single mode or Multi mode | ||
Operation time | S | About 50(no fiber cut) | |
Insertion Loss | dB | ≤0.5 | |
Insertion Loss Typical value | dB | 0.3 | |
Return Loss | dB | ≥50 | |
Fastening strength of naked fiber | N | ≥5 | |
Tensile strength | N | ≥50 | |
Reusable | Time | ≥10 times | |
Operating Temperature | ℃ | -40～+85 | |
On-line tensile strength(20N) | dB | ΔIL≤0.3 | |
Mechanical durability(500 times) | dB | ΔIL≤0.3 | |
Drop-off test(drop-off height4m,once per direction,totally 3 times) | dB | ΔIL≤0.3 | |
3.Environmental performance requirements
Category | Specification | |||
Condition | IL Variation | RL Variation | Appearance | |
High TEMP | 110℃，200H | ≤0.5 | ≤5 | No mechanical damage, like deformation, cracking and untight
|
Low TEMP | -40℃，200H | ≤0.5 | ≤5 | |
TEMP Cycling | -40～85℃，3.5H/Cle，100C | ≤0.5 | ≤5 | |
HAST | 110℃，90%RH,200H | ≤0.5 | ≤5 | |
Immersion | 25℃,200H | ≤0.5 | ≤5 | |
Salt Mist | 5% Nacl，6.5＜PH＜7.5，35℃,200H | ≤0.5 | ≤5 | |
4.Mechanical Performance Requirements
Category | Specification | |||
Condition | IL Variation | RL Variation | Appearance | |
Impact | Height: 4m； 1 drop each axis； 3 cycles | ≤0.5 | ≤5 | No mechanical damage, like deformation, cracking and untight
|
Vibration | Frequency: 10 ～ 50HZ； Sweep: 45 times / min； amplitude: 0.75mm； Duration:30min each axial | ≤0.5 | ≤5 | |
Torsional | Pull：15N； The distance between Loading location and fast connector: L = 22-28cm；Rate：10times / min. Times: 200 | ≤0.5 | ≤5 | |
Tensile | Pull：50N；The distance between Loading location and fast connector: L = 22-28cm； Duration:1min. | ≤0.5 | ≤5 | |
